Johnson Pumps are one of the world’s leading manufacturers of pumps for marine use. With over thirty years of marine pump experience, that is why so many boat owners and leading manufacturers of marine engines and recreational craft trust Johnson Pump to provide solutions for all their pumping needs.
Pumps for pleasure and commercial craft are sold all over the world through a network of authorised distributors and affiliated retailers |
 |
|
AQUAJET 9 lpm
Quiet and pulsation free even at low speeds, the new Aqua jet five chamber diaphragm pump from Johnson Pump provides the perfect solution for both small and medium sized leisure and commercial boats.
The enlarged five-valve, five chamber design improves efficiency while reducing motor speed at the same time. Lower stress on the diaphragm increases its life as does the fact the diaphragm snaps into place and is therefore not perforated anywhere by screws or bolts. A mounting bracket with hollow rubber cushioning is standard & makes it possible to install the Aquajet in virtually any position while assuring whisper quiet operation. It is recommended to install with an inline strainer & an accumulator tank.
CE marked |
£
each
|
|
|
|
AQUAJET 13 lpm
Quiet and pulsation free even at low speeds, the new Aqua jet five chamber diaphragm pump from Johnson Pump provides the perfect solution for both small and medium sized leisure and commercial boats.
The enlarged five-valve, five chamber design improves efficiency while reducing motor speed at the same time. Lower stress on the diaphragm increases its life as does the fact the diaphragm snaps into place and is therefore not perforated anywhere by screws or bolts. A mounting bracket with hollow rubber cushioning is standard & makes it possible to install the Aquajet in virtually any position while assuring whisper quiet operation. It is recommended to install with an inline strainer & an accumulator tank.
CE marked |
£
each
|
|
|
|
AQUAJET 19 lpm
Quiet and pulsation free even at low speeds, the new Aqua jet five chamber diaphragm pump from Johnson Pump provides the perfect solution for both small and medium sized leisure and commercial boats.
The enlarged five-valve, five chamber design improves efficiency while reducing motor speed at the same time. Lower stress on the diaphragm increases its life as does the fact the diaphragm snaps into place and is therefore not perforated anywhere by screws or bolts. A mounting bracket with hollow rubber cushioning is standard & makes it possible to install the Aquajet in virtually any position while assuring whisper quiet operation. It is recommended to install with an inline strainer & an accumulator tank.
CE marked |
£
each
|
|
 |
|
AQUAJET PUMP DUO 38LPM 41psi 2.8bar
High demand unit with two parallel connected Aqua Jet WPS capacity 38 Lpm fixed on a base with inline strainer and pre-pressured 2 litres accumulator tank |
£
each
|
|
 |
|
AQUAJET PUMP UNO 13LPM 41psi 2.8bar
Built on the whisper quiet and pulsation-free Aqua jet series water pressure systems. The units combine all the elements needed for ease of installation as well as built in pre-pressurised 2 litres accumulator tank and inline strainer. The new base design allows for installation in both vertical and horizontal position making the pump a true saving unit especially suited for today's modern marine needs.
|
|
|
|
|
AQUAJET PUMP UNO 19LPM 41psi 2.8bar
Built on the whisper quiet and pulsation-free Aqua jet series water pressure systems. The units combine all the elements needed for ease of installation as well as built in pre-pressurised 2 litres accumulator tank and inline strainer. The new base design allows for installation in both vertical and horizontal position making the pump a true saving unit especially suited for today's modern marine needs. |
|
|
 |
|
FLOJET LARGE GALLEY PUMP 17LPM
Water System pump - 4325 series. For use with a 1 to 5 gallon (3-20 litre) accumulator tank, designed for 6 or more fixtures, provides quiet operation and smooth flow, runs dry without harm to pump, includes two (19mm) hose barb ports, two (19mm) garden hose ports and one Flojet (19mm) barbs inlet water strainer. |
|
|
 |
|
FLOJET GALLEY PUMP 12.5LPM
Water System pump - 4405 series smooth water flow. Do not use with an accumulator tank, has internal bypass valve. For up to 5 fixture systems. Delivers smooth, steady generous water flow from 1-3 gpm (3.8 to 11.4 1pm) with out the need for accumulator tank
Special intenal bypass feature allows excess water to recirculate inside the pump head eliminating the pulsating water and pressure switch chatter.
runs dry without harm to the pump
Includes two 1/2" (13mm) hose barb ports
Install with Flojet inlet strainer (not included)
Dimensions: (HxWxL): 95x160x208mm
Weight: 1.8kg |
|
|
